Network Switches
Explore certified, discontinued, and unapproved switches tested for NetworkHD.
Certified Switches
The following document outlines the recommended switches to use with NetworkHD products to ensure proper operation of the system. These switches have been tested and verified by WyreStorm for seamless NetworkHD operation.
WyreStorm cannot guarantee the performance of a switch that is not listed below. If you choose to use a switch not contained in this document, you assume all risk.
NetworkHD 100 | 400 | 500 Series
Cisco CBS350-8/16/24/48-4G (P/FP)
✓
✓
Cisco CBS350-8/24/48-4X (P/FP)
✓
✓
Cisco Catalyst 3560CX Series
✓
✓
Netgear GS728/752TPv2
✓
✓
Netgear M4250 Series (All Models)
✓
✓
Pakedge MS-1212/2400/2416/2424/4424
✓
✓*
Ruckus ICX 7150-24/48 (P, PF, ZP)
✓
Ruckus ICX 7250-24/48P
✓
Ruckus ICX 7650-48P/48ZP
✓
Ubiquiti EdgeSwitch 24/48
✓
Niveo NGSME Series
✓
✓
Zyxel XMG/XS1930 Series (All Models)
✓
✓
Zyxel GS1920-24/48HP v2
✓
✓
Zyxel GS2220 Series (All Models)
✓
Zyxel XGS220 Series (All Models)
✓
✓
Araknis AN-620, AN-320
✓
✓
* 3 or more Pakedge switches do not meet the minimum requirements.
NetworkHD 600 Series
Netgear XS708/712/716T
✓
✓
Netgear M4300-16/24/48/96X
✓
✓
Ruckus ICX 7650-48P/48ZP
✓
Ruckus ICX 7750-48C
✓
Zyxel XS1930-12HP
✓
Zyxel XGS3800-28
✓
Araknis AN-920
✓
✓
Default Config
Discontinued Switches
The following switches are still supported by NetworkHD but have been discontinued by their manufacturer and may no longer be available for sale. Where applicable, WyreStorm has tested and verified newer versions/model replacements for the below products.
NetworkHD 100 | 400 | 500 Series
Cisco SG300 Series
Cisco CBS350 Series
Cisco SG350 Series
Cisco CBS350 Series
Cisco SG350X Series
Cisco CBS350 Series
Cisco SG550X Series
Cisco CBS350 Series
Pakedge S3/S3L-24P
Pakedge MS Series
Zyxel XGS3700-24/48HP
Zyxel XGS2210 Series
Zyxel XGS2210-28/52HP
Zyxel XGS2220 Series
Zyxel GS1920-24/48HP v1
Zyxel GS1920-24/48HP v2
Unapproved Switches
The following switches have been flagged as unapproved for use with NetworkHD components. These switches either do not meet the minimum configuration requirements to allow a NetworkHD system to operate or have performance issues and are deemed unapproved for use.
Luxul AMS-2624P
Does not meet performance requirements.
Luxul AMS-4424P
Does not meet performance requirements.
Luxul XMS-5248P
Does not meet performance requirements.
Luxul XMS-7048P
Does not meet performance requirements.
Ubiquiti Unifi 16
Does not meet performance requirements.
Ubiquiti Unifi 24
Does not meet performance requirements.
Ubiquiti Unifi 48
Does not meet performance requirements.
Cisco Catalyst C9400-LC-48UX
Does not meet performance requirements for NetworkHD 600 series.
FS S5860-24XB-U
Does not meet performance requirements for NetworkHD 600 series.
Last updated
Was this helpful?