NetworkHD Setup
Watch the tutorial or read the guide below.
The Setup Wizard guides you through 7 easy steps to get your NetworkHD system up and running.
When you access your CTL-Pro controller for the first time, a setup wizard will automatically welcome you. You can reopen it at any time by going to the Controller tab, selecting Reopen the Wizard, and refreshing the page.
Access the CTL-Pro WebUI
How to Access the WebUI?
Open a web browser.
Enter the controller's IP address.
The login screen will appear. The default username and password are both admin.
Step 1: IP Addresses
Set IP addresses of your devices.
How to Set IP Addresses?
On the left side, you will see a list of online transmitters and receivers. You have three options:
Leave devices on their default DHCP addresses.
Assign IP address to each device individually.
Assign IP addresses in bulk to multiple devices.
Once the IP addresses for the devices are set, click Continue to configure the IP addresses for the controller's AV and Control ports. Click Apply & Reboot.
Step 2: Alias Names
Assign alias names to your transmitters and receivers to identify them easily.
Step 3: Video Wall
A Video Wall configuration links multiple displays to form one large display surface. This allows you to show one image across multiple displays or a different source on each display.
Standard Video Wall
A Standard Video Wall uses a simple grid layout (like 2x2 or 3x3).
Enter the number of rows and columns for your video wall and assign it a name.
Click Create Layout/Scene, enter a layout name, and choose a type.
Drag and drop transmitters and receivers from the list to the appropriate displays.
Click Apply and Save.
Combine Multiple Displays
Combine multiple displays to show a single image across all selected displays.
Click on each display in your layout that you want to combine, then click the Combine button.
Name the new logical screen, and click OK.
Drag a single transmitter from the list to the new combined display.
Click Apply and Save.
Mosaic Video Wall
A Mosaic Video Wall lets you arrange displays in any custom layout.
Set the width and height of the video wall area and give it a name.
Click the + button in the Displays section to add individual displays and enter the required information.
Drag and drop the displays onto the video wall area, arrange them freely or set exact coordinates and angle.
Drag and drop a transmitter and receivers from the list to assign them to specific displays.
Click Apply and Save.
Step 4: Multiview
Multiview allows you to show multiple video sources on a single display simultaneously.
Configure Multiview
Select a Multiview receiver.
Choose a Multiview layout from a dropdown or create a custom one.
Drag and drop transmitters onto the displays in your layout.
Click Apply and Save.
Step 5: Touch App Zones
Touch App is a free application for iPad and Android that lets you control your NetworkHD system. To learn more about the app, see the NHD Touch App page.
How to Create a Zone?
For example, you could create a zone named Reception to group receivers located in a reception area.
Click the + icon to create a zone and give it a name.
Select the new zone.
Select the decoders from the list and click Add to Zone.
Repeat these steps for all the zones you want to create.
Step 6: Display Control
Display Control uses CEC, RS232 and IR commands to power displays on and off. Control will be available in the Touch App.
Configure Display Control
Select one or multiple decoders from the list.
Configure the commands for CEC, RS232, or IR.
Click Apply.
Use the test area on the right to verify the commands.
Step 7: Setup is done!
Congratulations! You've set up the NetworkHD system. Click Finish to go to the main dashboard.
Last updated
Was this helpful?